Simulating Inginious tests

.gitignore

@@ -5,4 +5,5 @@ log_files/
 *.zip
 linksimulator/
 demo.*
-interpo/
+interpo/
\ No newline at end of file
+noice/
\ No newline at end of file

Makefile

@@ -16,7 +16,9 @@ RECEIVER_OBJECTS = $(RECEIVER_SOURCES:.c=.o)
 SENDER = sender
 RECEIVER = receiver
 
-all: $(RECEIVER) $(SENDER)
+all: debug
+
+aux: $(RECEIVER) $(SENDER)
 
 $(SENDER): $(SENDER_OBJECTS)
 	$(CC) $(SENDER_OBJECTS) -o $@ $(LDFLAGS)
@@ -46,7 +48,7 @@ tests: debug
 
 # By default, logs are disabled. But you can enable them with the debug target.
 debug: CFLAGS += -D_DEBUG
-debug: clean all
+debug: clean aux
 
 # Place the zip in the parent repository of the project
 ZIP_NAME="../projet1_ingenzi_demeester.zip"

src/receiver_utils.c

@@ -38,7 +38,7 @@ int send_if_inneed(struct pollfd * pfd, receiver_state_t * state)
         size_t written = write(pfd->fd, (void *) buffer, len);
         if (written != len)
         {
-            ERROR("When witing a ACK to socket, didn't written the correct len");
+            ERROR("When writing ACK to socket, didn't write the correct len");
             return -1;
         }   
         DEBUG("Sent ACK saying we are waiting for %d, timestamp %d", pkt_get_seqnum(state->ack_to_send), pkt_get_timestamp(state->ack_to_send));
@@ -89,6 +89,8 @@ int update_buffer_upon_new_data(receiver_state_t * state, const pkt_t * pkt)
         return 0;
     }
 
+    // We only reach here when we received packets in sequence.
+
     uint16_t next_wait = state->last_received_in_order;
     while (state->recvd_buf[next_wait] != NULL)
     {
@@ -100,7 +102,6 @@ int update_buffer_upon_new_data(receiver_state_t * state, const pkt_t * pkt)
         state->curr_recv_window  = (state->curr_recv_window < RECV_MAX_SLCTV_RPT_WDW) ? state->curr_recv_window+1 : RECV_MAX_SLCTV_RPT_WDW;
         state->recv_window_start = (state->recv_window_start + 1) % TWO_EXP_EIGHT; 
         next_wait                = (next_wait + 1) % TWO_EXP_EIGHT; 
-        
     }
     return 0;
 }
@@ -309,7 +310,6 @@ int handle_incoming(struct pollfd * pfd, receiver_state_t * state)
  */
 void reception_loop(struct pollfd * pfd, receiver_state_t * state)
 {   
-    uint8_t chance_to_send_ack_nack = 1;     // Allows the receive to send ATLEAST an ACK each 1/1O iteration
     struct timeval current_time, last_packet_received;
     while (state->ack_to_send != NULL || state->transfer_done == 0)
     {
@@ -321,7 +321,7 @@ void reception_loop(struct pollfd * pfd, receiver_state_t * state)
             return;
         }
 
-        if (pfd->revents & POLLIN && chance_to_send_ack_nack % 10 != 0)
+        if (pfd->revents & POLLIN)
         {
             if (handle_incoming(pfd, state) != 0)   
                 return;
@@ -343,7 +343,6 @@ void reception_loop(struct pollfd * pfd, receiver_state_t * state)
                 return;
             }
         }
-        chance_to_send_ack_nack++;
     }
 }
 

tests/advanced_test.sh

@@ -26,11 +26,11 @@ touch "${TEST_OUTPUT_FILES}/adv_${BSN_PRE}_received_file.${BSN_EXT}" \
 
 # The next 2 lines come from: https://unix.stackexchange.com/questions/55913/whats-the-easiest-way-to-find-an-unused-local-port
 # We use this to be sure we're using unused port
-port1=$(comm -23 <(seq 49152 65535 | sort) <(ss -Htan | awk '{print $4}' | cut -d':' -f2 | sort -u) | shuf | head -n 1)
-port2=$(comm -23 <(seq 49152 65535 | sort) <(ss -Htan | awk '{print $4}' | cut -d':' -f2 | sort -u) | shuf | head -n 1)
+port1=$(comm -23 <(seq 65000 65200 | sort) <(ss -Htan | awk '{print $4}' | cut -d':' -f2 | sort -u) | shuf | head -n 1)
+port2=$(comm -23 <(seq 65000 65200 | sort) <(ss -Htan | awk '{print $4}' | cut -d':' -f2 | sort -u) | shuf | head -n 1)
 
 # We first launch the link simulator 
-./linksimulator/link_sim -p $port2 -P $port1 -l 70 -d 1500 -e 20 -c 10 -R \
+./linksimulator/link_sim -p $port2 -P $port1 -l 0 -d 0 -e 0 -c 0 -R \
   &>${TEST_OUTPUT_FILES}/adv_${BSN_PRE}_link.log & link_pid=$!
 
 # We launch the receiver and capture its output

tests/run_tests.sh

@@ -8,20 +8,20 @@ TEST_FILES_DIR=./test_files/
 rm -rf ./unwanted_logs/*
 
 # We want our tests to always use valgrind 
-echo -e "\nStarting simple tests ...\n"
-for FILENAME in "$TEST_FILES_DIR"/*
-do 
-  FILESIZE=$(stat -c%s "$FILENAME")
-  echo -e "Sending $FILENAME \t\t [$FILESIZE bytes], \t\t with Valgrind"
-  ./tests/simple_test.sh $FILENAME
+#echo -e "\nStarting simple tests ...\n"
+#for FILENAME in "$TEST_FILES_DIR"/*
+#do 
+#  FILESIZE=$(stat -c%s "$FILENAME")
+#  echo -e "Sending $FILENAME \t\t [$FILESIZE bytes], \t\t with Valgrind"
+#  ./tests/simple_test.sh $FILENAME
 
-  if [ $? -ne 0 ]; then 
-    echo "Tests terminated cause of a failed test"
-    exit 0
-  fi
+#  if [ $? -ne 0 ]; then 
+#    echo "Tests terminated cause of a failed test"
+#    exit 0
+#  fi
 
-done
-echo -e "Finished Simple tests."
+#done
+#echo -e "Finished Simple tests."
 
 if [ -d linksimulator/ ]; then
   echo -e "\nStarting advanced tests ...\n"

tests/simple_test.sh

@@ -28,7 +28,7 @@ touch "${TEST_OUTPUT_FILES}/${BSNM_PRE}_received_file.${BSNM_EXT}" \
 
 # The next line come from: https://unix.stackexchange.com/questions/55913/whats-the-easiest-way-to-find-an-unused-local-port
 # We use this to be sure we're using unused port
-port=$(comm -23 <(seq 49152 65535 | sort) <(ss -Htan | awk '{print $4}' | cut -d':' -f2 | sort -u) | shuf | head -n 1)
+port=$(comm -23 <(seq 65000 65200 | sort) <(ss -Htan | awk '{print $4}' | cut -d':' -f2 | sort -u) | shuf | head -n 1)
 
 # We launch the receiver and capture its output
 valgrind --leak-check=full --log-file=${TEST_OUTPUT_FILES}/valgrind_${BSNM_PRE}_receiver.log \